0769-23388351
Toggle Navigation
Linear motor, mainly used in some automatic control systems, is a transmission device that can directly convert electric energy into linear motion. Because it is a high-tech, more and more applications, so the overall prospect is quite good.
Many people ask, why is linear motor more expensive? In fact, one of the most important factors affecting the price of linear motors is one of the rare earth magnets on the hardware of linear motors.
What kind of magnet does a linear motor use?
Linear motor is a permanent magnet, which is a high-performance NdFeb block magnets, with different specifications. See the picture below.
Where is the magnet of linear motor used?
According to the inquiry, the magnetic rail fixes the magnet on the steel.
PS: How long is the service life of this motor?
There is no life problem under normal use, but the linear slide rail, cable, running groove and so on are expendable, so the life is limited to these parts and materials. In normal use, there should be no problem for six years.
Our company focuses on high-performance NdFeb strong magnet, Micro Tiny Magnets, Powerful neodymium arc magnets, multi-pole ring magnets, size and performance can be according to your requirements, welcome to contact the courage magnet manufacturers (China).
Related motor magnet problems;
What is the biggest difference between arc magnet and rectangle magnet for motor?
Requirements of brushless dc motor magnet
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....