0769-23388351
Toggle Navigation
N35 and N52 are both performance grades of rare earth neodymium magnets. What is the difference between them? How do I choose and distinguish? Today, Chinese magnet supplier Courage Xiaofu is here to talk about these topics that you are concerned about.
What's the difference between n35 and n52?
N35 and n52 are the two grades of neodymium iron boron, representing the difference in the magnetic properties of the two neodymium iron boron. The main difference between the two grades is the difference in remanence. The N35 remanence range is 1.17T-1.22T, and the N52 remanence range is 1.43T-1.48T. For NdFeB of the same size, the greater the remanence value, the stronger the magnetism, and the higher the price. It can be seen that NdFeB n35 is different from n52 in that N52 is more magnetic. However, the corresponding cost advantage of N35 is more accepted by the public and the demand is larger.
The image quoted below is an N52 curved neodymium magnet
How can you tell if a neodymium magnet is N35 or N52?
From the appearance, you can't see it because they are the same, but you can use magnetic force, absorb things, or measure the meter's magnetic force and magnetic flux. The difference between the two is quite big.
If you want to customize magnets with the same performance as your existing samples in batches, you can send the samples to the supplier. They measure Gauss with their own Gauss meter, then judge the performance of the magnets through experience, and then customize the samples. Measure with the same Gauss meter, and compare the Gauss.
Our company is a professional permanent magnet manufacturer, for N52 neodymium magnets, Micro Tiny Magnets, ultra-thin rare earth magnets, radial magnetized ring magnets have a great price advantage, you may wish to send inquiries.
Editorial recommendation of content related articles;
What is the magnetic strength gauss of the N52 super magnet?
How much stronger is N55 grade neodymium magnet than N52?
Nd magnet N52 grade material description and demagnetization curve
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....