0769-23388351
Toggle Navigation
Neodymium magnets come in many different grades, each represented by the letter "n" and a number from 35 to 52. What's the difference? Today, Chinese magnet supplier Courage Xiaofu will introduce to you what are the differences between n35 magnet and n50 magnet?
Neodymium magnet N35 and N50 difference;
The difference between n35 and n50 magnets is the maximum intensity at which they can be magnetized. The basic principle is that the higher the number, the stronger the magnetic force of the magnet. n35 is relatively common and most customers will choose this grade because it is cost-effective.
Thin flat ring neodymium magnet
How much stronger is the N50 magnet than the N35 magnet?
In fact, it is difficult to determine exactly how strong an N50 magnet is compared to an N35 magnet. The reason is that there are several factors that affect the strength of the magnet, so if you want to compare two magnets and get a real answer, you must use magnets of exactly the same size. The price difference between n35 and n50 magnets. Under the same size specifications, the magnetic force of n52 is much higher than that of n35, and the price of N50 is higher.
The difference between n35 and n50 performance parameters
N35 magnet performance parameters (BH) m≥33－36MGOe, Hcj≥12.0KOe, Br≥11.7－12.2KGs;
N50 magnet performance parameters (BH) m≥48－51MGOe, Hcj≥12.0KOe, Br≥14－14.5KGs;
Recommended viewing: Magnetic property parameters of sintered Nd-Fe-B
How do I choose the right grade of neodymium magnet?
The choice of which level depends on your product application, the requirements for magnetic force, such as the need to like multiple, magnet size size, and so on, a lot of foreign customers like to choose N52 level.
It is worth mentioning that both N35 and N50 can only withstand the temperature of 80 degrees Celsius. If the working environment exceeds the temperature, the M, H and SH grades need to be replaced.
If you have any questions can give us a message online, we will import reply to your message after receiving, thank you for your reading!
Want to know about N35 and N50 magnetic field strength can use tools to estimate: https://www.dgcourage.com/about/round-magnetic-field-strength/
Highly relevant articles are recommended;
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....