0769-23388351
Toggle Navigation
Arc magnets are mainly used in various DC motors, such as brushless DC motors, permanent magnet DC motors, etc., and magnets are indispensable. So what are the main arc magnet materials used in motors? What are the advantages? Please read on.
Strong magnetic force, can keep the power unchanged, reduce the size of the motor, the starting current is also small, and it is not easy to stall (ie overload). Generally, the temperature resistance H level and above are used.
2. Ferrite arc segmented magnet
It has the advantages of low price, high magnetic permeability, high temperature resistance, and not easy to demagnetize. The proportion of ferrite magnetic tiles in the motor is also large.
3. Bonded NdFeB magnetic tile
Bonded NdFeB magnetic tile is also a kind of magnetic tile, but it is made of bonded NdFeB material, and there are few customers. At least I haven't come across it yet.
4. Samarium cobalt magnetic tile
Samarium cobalt magnetic tiles are mainly used in some high-end motors, with a temperature resistance of up to 300 ℃, and the price is relatively expensive, and most of them are replaced by neodymium arc magnets.
Arc magnets can also be punched, see: Perforated counterbore arc neodymium magnet
At present, the customers on the market are mainly neodymium arc bending magnets and ferrite bending magnets. The production of neodymium arc magnets does not require molds, but ferrite arc magnets do (except for molds). Customers are welcome to provide size consultation. price, sample.
Introduction to related arc magnet articles;
How to custom arc magnets? What should we pay attention to?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....