0769-23388351
Toggle Navigation
How much suction does a 5000 Gauss magnet have? I saw such a magnet problem when I was browsing the web. Today I want to talk with you.
How much weight of somethings will can be attracted for magnet of 5000 gauss?
High strength curved neodymium magnet
There are many similar questions. Many customers ask how many Gauss magnets can lift and how far can they absorb? There are also questions such as how much magnetic force the 3000 gauss magnet has, etc. These are very unprofessional questions, why? Because the Gauss of magnet is not computable with the product that can absorb multiple, and how far it can absorb. It is not that the greater the Gauss of magnet, the greater its pull force. The number of magnets that can absorb is related to the size, shape, and magnetizing method of the magnet, as well as how to attract (horizontal suction? Vertical suction?) A single surface magnetic force can not explain any problem?
Some friends may not understand, here is an example: for example, a small magnet 5000GS, can absorb 0.8KG. The other big magnet, 1000GS, can absorb 100KG instead, so it depends on its volume (the contact surface).
Write at the end: with the same magnet specification, the greater the surface Gaussian value, the stronger the magnetism.
If you need customized NdFeB high-strength magnets, 4500gs, 5000gs, 5500 Gauss magnets, please contact us!
5000 Gauss neodymium magnet related specifications;
Strong magnetic cylinder 9.5x10mm 5000 Gauss
5000 Gauss magnet related article introduction;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....