0769-23388351
Toggle Navigation
Introduction to 9.5mmx10mm neodymium cylindrical magnet;
Size: diameter 9.5mm, thickness 10mm
Grade: N35-N52
Temperature:<80 ℃
Surface coating: galvanized
Tolerance: ± 0.05
Magnetization direction: thickness
Surface magnetic force: about 5200 ± 10% Gauss
Supplier location: Dongguan, China
Production cycle: 7-15 days
The neodymium magnet should not be too large to reach 5000 Gauss or above, and it needs a certain thickness, which usually needs to be equal to or greater than the diameter to meet. If you need to quote or customize, please leave a message to us.
Cylindrical neodymium magnet smaller than this specification;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....
This is a 5mm thick ring magnet made of sintered rare earth neodymium, the outer diameter of the ring is 62mm, the inner hole is also relatively large, 54mm, belongs to the medium size neodymium ring magnet, there is no need to customize in stock, axial magnetization, nickel plated surface, silver white,...