0769-23388351
Toggle Navigation
N42SH and N42UH are common neodymium-iron-boron permanent magnet material grade, indicating its performance level and high temperature resistance characteristics, some customers do not know how to choose these 2 performance levels, the following Courage Xiaofu to point out for you.
The main difference between one: the number of temperature resistance is not the same
N42 SH and UH behind the maximum operating temperature range of the magnet, N42SH grade working temperature limit of 150 ℃, N42UH grade working temperature limit of 180 ℃!
Practical application scenarios are also different
N42SH is mainly used in medium to high temperature environments, such as high performance fans, power tool motors, medical equipment, etc. N42UH is more suitable for extreme high temperature environments, such as oil drilling equipment, high temperature sensors, and jet engine components.
Neodymium countersunk magnet ring.
Price is not the same
The cost of N42UH is higher than N42SH (under relevant size and shape), which can also be seen from the price of blank material.
How to choose?
When choosing between N42SH or N42UH, you need to consider the actual temperature needs of your equipment, the cost, and the magnetic requirements. UH maintains magnetic stability better in high temperature environments. If your equipment operates above 150°C, the N42UH would be the more appropriate choice, while in high temperature environments below 150°C, the N42SH is more cost-effective.
Similar articles;
Neodymium Magnet Grade N42SH vs N42
What is the magnetic strength of N42 neodymium magnet 8 x 8 MM ?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....