0769-23388351
Toggle Navigation
N42SH, N42, they are all neodymium magnets (neodymium iron boron), as for why the front has the suffix SH and the back does not, what is the main difference between the two, some friends are not very clear, because there is no article on their differences on the Internet., the permanent magnet manufacturer Courage Xiaofu will introduce to you next.
What is the difference between NdFeB n42 and 42sh material?
The main difference is the temperature resistance, Magnetic force is similar, The dysprosium content is different. The metal dysprosium content added to the SH grade NdFeB grade is: 1-4.5%. The grade sh has better temperature resistance and is mostly used in the motor field.
Comparison of magnetic properties between N42 and N42SH grade neodymium magnets
The highest grade of neodymium magnets currently available is N52, and any letter after the grade refers to the temperature rating of the magnet.
Is it reasonable that NdFeB n42 is two points less efficient than n42SH?
It is reasonable. According to the sintering principle, the raw materials used for high temperature resistance are different, because we are not in the maximum area when we use it, and N42SH is more efficient in a certain range.
Choose N42 grade or n42sh?
This mainly depends on where your magnets are used. If the normal environment is N42, there is no need to waste money (the price of N42 grades of the same size will be higher).
The above is about the introduction of Neodymium Magnet Grade N42SH vs N42, do you understand?
More N42 grade neodymium magnets introduction；
What is the magnetic strength of N42 neodymium magnet 8 x 8 MM ?
Related product matching;
This 1mmx1mm miniature circular magnet has a compact size and a surface magnetic field of approximately 2900 Gauss, making it suitable for precision applications with high requirements for magnet size....
This product is a miniature round magnet, made of rare earth NdFeB magnets, belonging to the ultra-small size magnet series, using N35 grade, the specific size is 1.5mm diameter, 1mm thickness, axial magnetization, surface nickel coating, tolerance ±0.05, such as If you are interested in this small magnet product, you can contact us to customize it for you....
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...