0769-23388351
Toggle Navigation
Can a 5mm diameter magnet pull up to 1kg? This question is what the editor saw in Baidu statistics today. With the question of this netizen, I will briefly say a few words to you below.
Neodymium-iron-boron magnets with a diameter of about 5mm are widely used in the market, such as 5x1mm, 5x2mm, 5x3mm, 5x4mm, etc. Can the pulling force of these magnets reach 1kg? Actually it doesn't work.
If the magnet with a diameter of 5mm has a suction force of 1kg, the thickness (height) of the magnet can only be increased under the condition that the diameter remains unchanged, and the performance level also needs to be increased to above N50. For example, the pull value of 5mmx10mm of N52 level is about 1kg. Left and right, the height is 15, or 20, then there is no problem.
The above is the introduction on whether the magnet pulling force of 5mm diameter can reach 1 kg. The article was originally edited by Karich Magnet. Thank you for your attention.
5mm diameter magnet series;
5x1mm Gold Plated Neodymium Magnets 1980gs
5x3mm neodymium magnets [Sales Gauss Price]
98% of viewers also read the following articles;
What is the pulling force of N50 magnet?
Magnetic field strength and pull force of 3mm dia neodymium magnet
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....