0769-23388351
Toggle Navigation
The 0.5mm thick magnet is relatively thin. This kind of thin magnet is widely used. Not long ago, I also sampled several thin rectangular neodymium magnets with a thickness of less than 1mm for an Iranian customer. About its Gauss and tensile force today to introduce.
How many gauss are there in a 0.5mm thick magnet?
The surface magnetic size of the magnet, which is what we call Gauss, is directly related to the thickness of the magnet. The same diameter or length and width, the thicker the thickness, the stronger the magnetic force. The Gauss meter measures, a neodymium iron with a diameter of 5x0.5mm The boron sheet magnet has a magnetic surface of about 900gs.
Circular Rare Earth Magnet Magnetic Field Strength Calculation: https://www.dgcourage.com/about/round-magnetic-field-strength/
0.5mm thick neodymium magnet pull force reference;
Diameter 1mm, thickness 0.5mm Neodymium round magnet pulling force is about 35g
Diameter 2mm, thickness 0.5mm Neodymium round magnet pulling force is about 55g
Diameter 4mm, thickness 0.5mm NdFeB round magnet pulling force is about 90g
Diameter 6mm, thickness 0.5mm Rare earth neodymium small round magnet pulling force is about 180g
Diameter 10mm, thickness 0.5mm Rare earth neodymium small round magnet pulling force is about 260g
Diameter 20mm, thickness 0.5mm Neodymium round magnet pulling force is about 480g
Pull calculation: https://www.dgcourage.com/about/pull-force/
The above is the introduction of Gauss and pull force of 0.5mm thick neodymium magnets. If you need to buy ultra-thin strong magnets, you can contact our company to quote and process samples for you.
0.5mm magnet sample display;
0.5mm thick square neodymium magnet 4x4x0.5mm
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....