0769-23388351
Toggle Navigation
Many netizens are interested in the tensile force value of N50 grade neodymium magnets. The following are some tensile force data compiled by the neodymium magnet manufacturer Courage for you. I hope it will help you.
The pulling force of the magnet is not only related to the size of the magnet, but also to the direction in which the object is attracted. The following data is for reference only, if you need more accuracy, you can use a tension meter.
N50 grade neodymium magnet pull force reference;
6mm x 1mm round magnet, pulling force about 300g
5mm x 2mm round magnet, pulling force about 550g
Disc size 5x3 about 600g pulling force
Round shape NdFeB 8x1 tensile force about 800g
Round 12mm x 7mm about 5.5kg pulling force
Round neodymium magnet D60x50 about 200kg pulling force
13mm x 3mm round neodymium magnet, pulling force about 3.48kg
Square Neodymium Magnet 12x8x2 Tension about 1,8kg
Block neodymium magnet 20x10x2 pull force about 2.2
Square neodymium magnet 20x2.5 pull about 4kg
Square neodymium magnet 7x7x7 pulling force about 3kg
Square neodymium magnet 10x5.5x2 pull force about 1.4kg
Square neodymium magnet 25x25x25mm pulling force about 39kg
Rectangle 50x25x10mm about 75kg pulling force
Ring magnet 24mm x 18mm x 2mm pulling force about 2.6kg
Ring Neodymium Magnet D20x8x3mm Pulling about 4.4kg
The above is the introduction about the pulling force of N50 magnets. You are welcome to inquire about the price of N50 magnets and customize 50 strong magnets.
Website related N50 neodymium magnet samples;
5mm x 5mm Cylinder N50 Neodymium Magnets
Recommended Pull Force Calculator:
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....