0769-23388351
Toggle Navigation
How many gauss does a magnet have to qualify? Seeing that some netizens are asking, do you also want to know? Next, the Chinese magnet manufacturer Courage Xiaofu will introduce this problem to you.
1、Magnet Gauss value is not fixed
The Gauss value of the magnet depends on the material, specification, performance level, etc. of the magnet, and it does not have a fixed value.
2. How much is the Gauss value of the magnet qualified?
The figure above shows that the customer requires the magnet Gauss to be 1000 ± 200 Gauss
The Gauss value that meets the customer's requirements is qualified, whether it is 200 Gauss or 5000 Gauss. This is because different customers have different Gauss requirements for magnets, and some customers have high requirements and cannot be low. Some requirements are low, and high is not enough. Some customer requirements cannot be high or low, within a certain range.
The above is the relevant introduction about how many Gaussian magnets are qualified. Our company specializes in various neodymium strong magnets, ferrite magnets, motor arc magnets, multi-pole ring magnets, welcome to inquire.
More magnet Gauss articles recommended;
Why does the magnet surface magnetism data measured by gauss meter change?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....