0769-23388351
Toggle Navigation
Ultra-thin magnets generally refer to magnets with a thickness of less than 1mm. Generally, there are two shapes: round and square and rectangle. They are mainly relatively easy to process. I saw some netizens ask whether ultra-thin magnets have strong suction? Tell me your opinion below.
Generally, the suction force of ultra-thin magnets is not too strong. No matter what material it is, the thickness determines its suction force (pulling force). The thickness of the magnet is proportional to the suction force. Once the thickness is thin, the suction force is greatly reduced, and it is easy to break and break. , If you want an ultra-thin magnet with strong suction, it is recommended to choose NdFeB material. At present, the strongest magnet material has a magnetic field strength of 500-1500 Gauss.
The following lists some ultra-thin circular magnets with a thickness of less than 1mm pulling force (for reference only);
N42 grade 3x0.5mm neodymium magnets have a vertical pull of about 75g
N42 grade 4x0.5mm neodymium magnets have a vertical pull of about 90g
N42 performance D10x0.4mm NdFeB vertical tension about 150g
N42 performance D15x0.5mm NdFeB vertical pull about 280g
Note: Ultra-thin magnets need to be handled carefully to avoid direct attraction and collision, they are easily cracked and damaged, the larger the size of the magnet and the thicker the thickness, the stronger the magnetic force, the 1mm thick magnet is suitable for fixing light and small items, not suitable for load-bearing .
Types of related thin strong magnets;
Super strong thin rectangular magnets
Thin square neodymium magnet with hole in the middle
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....