0769-23388351
Toggle Navigation
Recently, some netizens asked why the data of the permanent magnet measured by the Gauss meter will change? Next, Dongguan magnet manufacturer courage will tell you about this Gauss meter measuring instrument.
Gauss meter is used to test the surface magnetic field strength of magnetic materials. It has been proved by experiments that it can test soft and hard magnetic.
The picture below shows the use of a gauss meter in the Courage Magnet Factory
Why does the measurement data of the permanent magnet change?
We generally use a gauss meter to measure the gauss of the magnet surface. However, the Gauss values measured at different positions on the surface of the magnet are different, the magnetic force is different every time the position moves, and the data measured by different Gauss meters are also different, and the error is relatively large. Our company uses a Japanese Gauss meter. You can also buy it for a few hundred yuan cheaper domestically.
Usually, the magnetic force in the center (the center surface magnetic force) is weaker than the magnetic force at the edge of the magnet. Usually, the magnetic force of this magnet is the highest surface magnetic force (many Gauss meters now have a locking function, that is, the highest value is locked).
PS: the Gauss of the magnet surface is like this, which is inversely proportional to the area and directly proportional to the thickness.
I guess you like the related articles;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....