0769-23388351
Toggle Navigation
The strength of the magnet is usually expressed by Gauss. Some customers have clear requirements for the Gauss of the magnet, such as greater than 3000 Gauss, higher than 5000 Gauss, or within a certain Gaussian range. Today we will introduce to you how many neodymium magnets are there. Gauss.
How many gauss do ndfeb (neodymium) magnet have?
If a specific Gauss value is required to detect the magnetic field strength of the magnet, we generally use a Gauss meter. The size of the magnet Gauss depends on the size, shape and grade of the magnet.
The smallest rare earth neodymium magnet is only a few hundred gauss, the large and thick magnet can reach 5000-6000 gauss, the general combination is 12000-13000 gauss, and the special combination may reach 15000-18000 gauss, or even higher.
Summary: Neodymium strong magnet Gauss does not have a fixed value, even if the magnets of the same shape and size have different performance levels, the Gauss is different.
The Gaussian will be different for different points of the test magnet.
Chinese magnet manufacturer Courage can customize different shapes of magnet steel products according to the requirements of customers in different industries. Welcome to contact us for quotation and customization.
More Neodymium Magnet Gaussian articles;
How many Gaussian magnets are qualified?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....