0769-23388351
Toggle Navigation
In the selection of NdFeB strong magnet coating, it is common to plating environment-friendly zinc and nickel. Some customers will ask when selecting the magnet coating that the nickel plating on the magnet (nickel copper nickel) can withstand the salt spray test for 48 hours, and I need to withstand the salt spray test for a longer time, such as 72 hours. Is nickel plating acceptable? Let's introduce it to you.... ...More>>
4-pole ferrite rotor, that is, there are 2 N poles and 2 S poles on the ferrite ring magnet. The hole in the middle of the magnet is used to install the shaft, mainly for radial magnetization. The 4-pole ferrite magnet is introduced below. The magnetization method of the rotor and the magnetization diagram, application, and some of our company's size specifications.... ...More>>
The commonly used coatings for magnets are nickel coating and zinc coating. In addition, a small number of customers choose chrome plating. Today, we mainly talk about the difference between chrome coating and nickel coating for magnets, and which coating is better.... ...More>>
About the strong magnet with countersunk hole, recently met a lot of customers to ask us about the price, some have already concluded a deal, some are still in further conversation, today this article will be for you to analyze the strong magnet with countersunk hole processing is not difficult, Whether necessary mold, and production process, application, etc.... ...More>>
The magnet cannot be drilled with threaded screw holes.. Whether it is a rare earth neodymium magnet, a ferrite magnet, or a samarium cobalt magnet, it is generally a through hole or a countersunk (countersink) hole.... ...More>>
Recently, I found that some Canadian customers are looking for such countersunk magnets. In fact, in addition to Amazon and some local magnet suppliers, you can also choose our Chinese magnet manufacturers, which may be more cost-effective.... ...More>>
Hello everyone, I am Courage magnet manufacturer Xiaofu, a network promoter who has been in the magnet industry for 6 years. If you have magnet problem. Please contact me. Today's topic: Is wet pressed ferrite magnets the anisotropy?... ...More>>
Ferrite multipolar magnetic ring and ferrite arc magnet are two types of magnets commonly used in DC motors. The multipolar magnetic ring is a ring magnet with multiple NS on its surface, while the arc magnet represents one pole. Eight pcs arc magnets are also eight poles. Today, we talk about the advantages and choices of ferrite multipolar magnetic ring and arc magnet.... ...More>>
The article is edited by Xiao Fu, the courage magnet manufacturer, mainly introduces the different magnetization methods, such as axial single-sided multipole, axial multipole, axial common magnetization on the influence of ferrite magnetism.... ...More>>
Generally, the diameter of the disk of NdFeB magnet can be as low as 1mm, and the thickness can be smaller.In the world, the smallest magnet is only the size of an atom(not widely used at present). Think about the concept.... ...More>>