0769-23388351
Toggle Navigation
Ferrite magnets are relatively cheap, have high temperature resistance and do not rust, which makes many customers choose them in many scenarios. There are a few purchasers who want to know what parameters are required for ferrite quotation? Now, Xiao Fu, the manufacturer of Karich magnets, will introduce this problem.
If it is ordinary sintered ferrite round, cylindrical, square, ring, the general quotation needs to provide the size, purchase quantity, same sex or opposite sex (grade), magnetization method, if you have special requirements, please specify (magnetic force range, tolerance requirements , chamfering, marking), ring and square need to pay attention, they are all 3 sizes.
For arc and special shaped ferrites, it is best to provide sketches or 2D drawings.
In addition to sintered ferrite, ferrite is also divided into injection-molded ferrite. This material is generally multi-pole magnetized, mainly ring-shaped. The quotation needs to provide the size, the number of magnetized poles, the method, the magnetic force requirement (magnetism), the most The best thing is to let the project produce a drawing, indicating the technical requirements, etc.
The above is a little introduction about the parameters required for ferrite quotation. Even if you don’t know it, we will ask you one by one. If you need a quotation for sintered ferrite magnets/injected ferrite magnets, please contact us to provide you with quotations and samples .
More ferrite magnet articles;
Composition ratio of ceramic ferrite magnet
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....