0769-23388351
Toggle Navigation
The magnetic braking system of the water drop wheel requires the use of magnets. The electromagnetic force generated by the magnetic line of force of the magnet cutting through the rotation of the wire cup will act in the opposite direction with the magnet, resulting in the braking effect. Some netizens asked about the magnet of the water drop wheel. (Magnetic Bean) What is the magnet? Is more the better? and is it universal? Let's introduce them to you separately.
What is the magnet (magnetic brake bean) of the water drop wheel?
Generally, they are strong magnetic NdFeB, round shape, and there are many specifications, such as 5mm x 1mm, 5mm x 1.5mm, 5mmx2mm, 5mmx3mm..., not necessarily universal, you need to confirm the size in your hand and then buy the corresponding size magnet.
Are more water drop wheel magnets better?
The more magnets, the more magnetic lines of force, and the greater the resistance generated when the spool is rotated, that is, the greater the braking force, the more delicate the adjustment, but at the same time the feel is heavier.
How to arrange the magnets of the water drop wheel?
This arrangement of NSNSNS is the largest arrangement of brakes, and it can be in any other way, as you like.
The above is the introduction of the relevant questions and answers about the water drop wheel magnetic bean magnet, edited by the permanent magnet common courage Xiaofu, I hope to help you.
Recommended magnet columns;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....