0769-23388351
Toggle Navigation
Some netizens may have encountered FB5H at work and want to know whether FB5H is the performance level of ferrite magnets (magnets). The following is a brief description of this issue by Dongguan magnet manufacturer Courage Xiaofu.
FB5H is the performance level of ferrite magnets, which is wet anisotropy. It is only the standard of TDK Corporation in Japan, which is equivalent to our domestic Y30H-1. It is suitable for motor types with large magnetic field reduction under high power.
FB5H magnetic characteristic parameters;
Related ferrite magnet columns;
More ferrite grade introduction;
Ferrite Magnet Main Parameters and Grades Datasheet
What is a C8 magnet? Grade 8 ferrite magnet related introduction
Ferrite is a sintered product, and there are some small missing corners at the corners, which is a normal phenomenon. If you do not find the magnet specification you want on our website, you can take the initiative to contact our online customer service to help you find or customize it....
This is a round ceramic ferrite magnet, belonging to the permanent magnet general magnetic, specification is 10mm diameter, thickness of 3mm. The edge is chamfered, the use of axial magnetization, the largest magnetic surface on the end face of the largest surface, the appearance of black, we are a Chinese magnet supplier, a variety of diameter specifications complete, in the price has a certain advantage, welcome to inquire quantity....
This is a diameter (radial) magnetization of small size ring magnet, material is sintered neodymium iron boron, performance grade is N48, is customized according to customer requirements, outer diameter of 7mm, hole 3mm, thickness of 3mm....
This product is a super small ring magnet, made of Rare earth Ndfeb material, the outer diameter is only 1.8mm, the thickness is 0.8mm, and the middle hole is less than 0.8mm....
This is a high-performance ferrite rectangular magnet, shot by the ferrite magnet manufacturer Courage Xiaofu original, Y30 grade, thickness direction magnetization, the specific specifications are length 40mm, width 30mm, thickness 10mm, has a strong suction。...
This 10x4x3mm screw hole ring neodymium magnet is made of highly magnetic NdFeB material N42, with an outer diameter of 10mm, an inner diameter of 4mm, a thickness of 3mm,...
This is a small flat ring ferrite magnet, the thickness is relatively thin, 1.5mm, outer diameter 6.5mm, inner diameter (hole) 2.3mm, black appearance, axial magnetization, provided by the Chinese magnet supplier courage magnet manufacturer, similar small thin box, small thin ring ceramic ferrite is our advantage products,...
This is a square rare earth neodymium magnet with a through hole (straight hole), N35 grade, the size of the magnet is 20mm long, 20mm wide, and 5mm thick, the magnetization method is thickness magnetization, and the surface has three layers of nickel, copper and nickel for good protection. Magnets, make life longer, suitable for industry....