0769-23388351
Toggle Navigation
The commonly used coatings for magnets are nickel coating and zinc coating. In addition, a small number of customers choose chrome plating. Today, we mainly talk about the difference between chrome coating and nickel coating for magnets, and which coating is better.
In the actual process, the performance of nickel plating will be more excellent, which is embodied in the bonding force with the substrate. The properties and toughness will not easily produce cracks and peeling.
Chrome plating is not useless. It is better than nickel plating in terms of wear resistance and has a bright surface. It is generally used for decoration, jewelry, cosmetics, etc. Its disadvantage is that the price of chrome plating is higher, the thickness of 12-15um is thinner, and the surface roughness is required. High, and will not be used in many cases.
No need for chrome plating, if brocade plating suffices.
Learn more about magnet coating thickness, color, salt spray resistance time: https://www.dgcourage.com/about/coating/
Introduction of relevant magnet coatings;
Advantages and disadvantages of nickel coating on neodymium magnets
Will the magnet coating (plating) affect the magnetic strength of the magnet?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....