0769-23388351
Toggle Navigation
In the coating selection of neodymium magnets, most customers choose nickel and zinc. Today, I will talk about the nickel coating of neodymium magnets separately, and introduce its advantages and disadvantages.
Advantages of nickel coating;
The advantages of nickel-plated magnets (currently using nickel-copper-nickel) are that the coating is relatively wear-resistant, bright in appearance, good in gloss, excellent in electrical conductivity, and resistant to salt spray 48H. After plating a layer of nickel, according to the requirements of the coating, it can also be Gold plating, silver, tin, chrome substitute, imitation gold, black nickel.
Disadvantages of nickel coating on magnets;
Single-layer nickel and some glues will lose the coating when they are used for bonding. At present, when NdFeB magnetic materials are nickel-plated, they basically use a multi-layer plating method, that is, Ni-Cu-Ni, which reduces the porosity of the coating. It can also make the corrosion resistance of the coating stronger. The price of nickel plating is higher than that of zinc plating, and the process is slightly more complicated.
The above is the introduction of the advantages and disadvantages of the neodymium magnet nickel coating. You can choose the appropriate coating according to your own application. If you do not understand, please contact our company to serve you!
Guess you also follow;
Neodymium magnet coating and plating [ type color thickness ]
Introduction Of Nickel Plated Neodymium Magnets
Nickel-coated neodymium magnet sample case;
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....