0769-23388351
Toggle Navigation
There are many kinds of magnetization methods for magnets, and there are also many kinds of magnetization waveforms, such as sine wave and square wave. What I want to tell you today is whether the magnetization waveform of magnets is sine wave or square wave.
Is the magnet magnetization waveform sine wave or square wave good?
Like square wave, it is mainly suitable for occasions where the motor mainly outputs torque, such as power tools.
The sine wave is mainly suitable for occasions that require the motor to run smoothly and with low noise, such as stepper motors.
If the magnet is charged with a square wave, the back EMF of the motor may be a square wave or a sine wave. If the magnet is charged as a sine wave, the back EMF of the motor is mostly a sine wave. Therefore, the magnetizing waveform of the magnet depends on the application of the motor and the driving method. The back EMF is a sine wave, which is suitable for sine wave driving, and the back EMF is a square wave, which is suitable for square wave driving. It is larger than the sine wave driven motor, that is to say, under the same volume, the square wave driven motor will be more powerful than the sine wave driven motor, but the torque output of the square wave motor is less smooth and suitable for power use. The smooth torque output of the wave motor is suitable for servo applications.
The above is the introduction of whether the magnetization waveform of the magnet is a sine wave or a square wave about the magnetization of the magnet.
Products related to this article;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....