0769-23388351
Toggle Navigation
To buy encoder multi-pole magnetic rings, welcome to contact Courage motor magnet manufacturer, our company can provide various types of encoder magnet magnetic rings, a variety of magnetic materials to choose from, and can provide low to high precision as required, As well as different sizes of shapes, magnetic pole spacing, etc., encoder manufacturers are welcome to consult.
The encoder magnetic ring brought to you today is a dual-track magnetic ring. The material is not an injection-molded ferrite magnet, but a rubber magnet. The cost will be lower. The number of magnetic poles of the two tracks (magnetic code track) is different. poles (32 pole pairs), the inner track has 62 poles (31 pole pairs), around the disk, the pole alignment between the inner and outer tracks is constantly changing.
When the encoder is working, the 2 magnetic field sensors located on the readhead will generate a sinusoidal signal when crossing the N and S stages, respectively. The phase shift between these two signals is unique for each position around the disk, The readhead converts this analog phase shift into digital signals, each of which corresponds to a unique rotational position on the ring.
Magnetic ring real shot sample picture, suitable for rotary encoder, product details: Robot arm encoder magnetic ring 64 pole 49 x 25 x 2 mm
Welcome customers to inquire and make inquiries.
The above is the introduction of the article encoder multi-pole magnetic ring new product 64-pole rubber magnetic material with lower cost. If you need ring magnets with more magnetic poles, such as 128 poles, etc., you can contact the website online customer service to serve you!
Other encoder magnetic rings;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....