0769-23388351
Toggle Navigation
Just see a know the question is about electric vehicle (bicycle) turn handle magnet, the netizen asked electric vehicle turn handle with what magnet? How does its magnetic force change? See also did not introduce very detailed, the following permanent magnet supplier courage to tell you about it.
What kind of magnet does electric bicycle turn handle use?
Xiao Fu has been in contact with several customers used in electric vehicle speed control turn, they use NdFeb arc magnets (curved magnet), proofing is used N35 performance, this can withstand 80 degrees of temperature. Most electric vehicle magnets are based on NdFeb material, after all, there are certain requirements for magnetic force.
Electric bicycle speed regulating magnet arc shape;
What is the change of magnetic force of rotating magnetic steel magnet?
At present, most of the handlebars are Hall handlebars. The output voltage of Hall handlebars depends on the strength of the magnetic field around Hall. Turning the handle changes the strength of the magnetic field around the Hall element and thus changes the output voltage of the Hall handle.
Guess you also want to know if the magnetic force of the magnet will demagnetize?
The magnetic steel will slowly demagnetize due to the motor heating and other factors, but because the internal Hall element is highly sensitive, it will not affect the use of the motor in general. Unless the motor overload and other factors cause the motor to produce a lot of heat in a short time and cannot timely heat dissipation, resulting in irreversible serious demagnetizing phenomenon of magnetic steel, and finally lead to the motor unable to operate and permanent stop, the magnetic steel can continue to be used after replacement.
Because customers use different specifications of the transfer magnetic steel, need to quote or find samples, welcome to contact courage magnet( High-temperature resistant NdFeB rotary handle magnet can be customized for you ).
Similar magnet article recommended;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....