0769-23388351

What are the common bad defect phenomena of magnets?

Addtime:2023-02-10 10:55:02 Click:212

If you have magnet problems, welcome to the FAQ column of Courage Magnet in Dongguan. At present, nearly 400 questions and answers about magnets have been collected, helping many netizens to solve their doubts. Today, what we bring to you is the introduction of common bad phenomena of magnets, including appearance, size, magnetic strength, magnetization, etc.


One, magnet undesirable phenomenon - appearance

Bad appearance of magnet

The appearance defects are mainly absent, foaming, falling corners, knife marks, sandy eyes, linen, scratches, etc.


Two, magnet undesirable phenomenon - size

Dimensional defects such as the diameter or length of the magnet, width, thickness is large or small, not in the tolerance range, resulting in the product can not be installed, some products need positive tolerance, some need negative tolerance, this QC can be found when testing.


Three, magnet undesirable phenomenon - magnetism

Magnetic is not enough is one of the common adverse phenomena, suction will not lead to suction, this phenomenon may be the customer in the choice of magnet size and performance level of the problem, it may also be the magnet manufacturer wrong materials and other problems, usually can be improved by increasing the thickness of the magnet or improve the performance of the magnet grade.


Four, magnet adverse phenomenon - magnetization

The common bad magnetization is the reverse direction of magnetization, and magnetization is not saturated.


The above will introduce the magnet in the appearance, size, magnetic strength and magnetizing aspects of the adverse phenomenon are what, pay attention to us, take you to know more about magnets.


Go to the Courage magnet manufacturers magnet knowledges column to learn more about magnet problems.

MAGNET PRODUCT RECOMMENDATION

Cylindrical Neo Magnet with Through Hole 6.3x3x11mm N42sh

N42SH grade radial hollow cylindrical magnet 6.3x3x11mm for high speed motors...

T shaped convex block N52 strong neo magnet

This product is a T-shaped strong magnet, the material is rare earth NdFeB, it is a custom-shaped irregular Nd magnet, the sample is N52 grade, the surface is nickel coated, mainly used for connectors, electronic products, medical equipment, the maximum working temperature It is 80 degrees Celsius. If you need to use it in a high temperature environment, you need to replace the temperature resistant material....

Custom shape rectangular block strong magnets with through hole

It is a custom shaped and powerful neodymium magnet. Rectangular block shape, magnetized in the direction of length. According to customer requirements, a round through hole is machined in the middle of the end face of the magnet....

Small diameter rod magnets 2mm x 10mm 1/16" x 3/8"

That this is a diameter of 2mm, thickness of 10mm cylindrical rare earth magnets, the diameter is not 10 but 2mm, belongs to the small diameter rod magnet,...

Big size flat rare earth square strongmagnets from China

Neodymium magnet still offers the strongest magnetic power nowadays and has been widely served to vast kinds of application, include high-performance permanent motors, brushless DC motors, magnetic separators, magnetic resonance imaging (MRI), sensors,loudspeakers, consumer electronics, and green energy. The third generation of rare earth permanent magnet NdFeB is the most powerful permanent magnet in modern magnets. It not only has the characteristics of high remanence, high coercivity, high magnetic energy product, high performance-to-price ratio, but also is easy to be processed into various sizes. Now it has been widely applied in various fields. Especially suitable for the development of high-performance, miniaturized, lightweight alternative products....

Radial hollow hole cylinder ferrite rotor magnets 20x6x45mm

Ferrite magnets, sometimes referred to as ceramic because of their production process, are the least expensive class of permanent magnet materials. Ferrite magnets became commercially available in the mid 1950’s and has since found its way into countless applications including arc shaped magnets for motors, magnetic chucks and magnetic tools....

Radial multipoles sintered ferrite ring magnet 25 x 13 x 5 mm

Ferrite magnets, sometimes referred to as ceramic because of their production process, are the least expensive class of permanent magnet materials. Ferrite magnets became commercially available in the mid 1950’s and has since found its way into countless applications including arc shaped magnets for motors, magnetic chucks and magnetic tools....

Arc Samarium Cobalt Permanent Magnets with Grooves

Arc samarium cobalt magnets are mainly used in electric motors, generators, sensors, medical equipment, aerospace, computer hard disks, automobiles, electronic equipment and other fields. They can be used to manufacture electromagnetic devices of various shapes and sizes, such as motors, generators, solenoid valves, electromagnets, sensors, etc....

WHAT ARE YOU STILL HESITATING? CONTACT US NOW!

CONTACT NOW