0769-23388351
Toggle Navigation
Gear position sensor, also known as gear switch sensor, is generally equipped in automatic transmission gearboxes, mainly used to detect gear position signals, generally assembled by rotor and casing, in which the rotor includes the magnet part, then the magnet is in the What does it do? What is the material of the magnet?
Injection magnetic sample display
The magnet mainly plays the role of providing a magnetic field, and is mostly made of injection-molded magnetic (plastic magnetic) material. The sensor is installed on the gearbox casing, and the matching shift shaft drives the magnet to rotate together. The sensor outputs different signals through the change of the magnetic field diverged by the magnet, which is fed back to the TCU.
The above is the introduction of the function and material of the magnet in the automobile gear sensor. Our company is a professional supplier of motor and motor magnets, which can provide various sensors and encoder magnets. Materials of multi-pole magnets, if you need samples, friends who evaluate the price of magnets are welcome to inquire.
Product recommendation column;
Injection Molded Ferrite Magnets
More sensor magnet related articles;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....