0769-23388351
Toggle Navigation
What is a sensor magnet? Does the Hall sensor need a special magnet magnet? Which material is the best for Hall sensor magnets? What is the relationship between Hall sensors and magnets? With these magnet questions, let's learn and understand together.
The sensor magnet, that is, the magnet used on the sensor, mainly plays the role of induction.
Ultra Small Ferrite Block Magnets For Hall Sensor 3.8x2X0.8mm
What kind of magnets are generally used for Hall sensor magnets?
Usually, the sensing magnetic steel is mostly bonded injection-molded magnetic steel, and the magnetic ring is mostly used for automobile range meter sensors, tachometer sensors, etc. Generally, plane multi-pole magnetization, radiation multi-pole magnetization and axial magnetization are used, and the magnetic performance is 500 ~2000GS, our sensing magnetic steel has the advantages of being strong, firm (not easy to fall off and deform), uniform density, and good magnetic field consistency.
Does the Hall sensor need a special magnet?
This is not needed, as long as the magnetic force is strong enough that the Hall element can sense it.
What are the components of a hall sensor?
It is generally composed of a Hall element and a magnetic steel. When the Hall element and the magnetic steel move relative to each other, a signal pulse will be generated, and the rotational speed can be calculated according to the magnetic steel and the number of pulses.
Courag Magnet Manufacturer-Produces injection-molded ferrite magnets for various sensors, bonded NdFeB magnets, radial multi-pole ferrite rotors, rare earth NdFeB magnets, which are widely used in motor speed measurement, electric bicycle speed Measurement, intelligent trolley displacement measurement, etc. At present, our customers are all over the world.
The above are some introductions about Hall sensor magnets, organized and shared by the Chinese magnet supplier Courage Xiaofu, I hope to help you!
Related articles are recommended to read;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....