0769-23388351
Toggle Navigation
We all know that magnets have north and south poles, but it is generally impossible to tell which is the north pole and which is the south pole with the naked eye. Therefore, if magnets are not marked, workers will not know which side is the N pole or S pole when operating them. Why do some magnets need to be marked, while others do not? Below, NST Magnet Manufacturer will explain this to you.
In our daily lives, some gift boxes and injection-molded parts require the use of magnets, and once the magnets are placed inside, they cannot be removed, or the cost of removal is extremely high, which can directly result in product scrap. Why is this such a serious issue? Because they utilize the principle of opposite poles attracting each other to form a mechanism similar to a switch lock. If the poles are the same, it will prevent the mechanism from closing properly, necessitating the removal of one of the magnets and its reinstallation in the opposite direction. This results in additional production steps, potentially damaging the product and causing waste.
Draw a line on the surface of the ring ndfeb magnet to distinguish between the north and south poles.
Ferrite or neodymium arc segment magnets used in motors usually require a specific direction of magnetic field to function properly. If not labeled, this may result in incorrect NS alignment, causing the motor to malfunction and leading to unnecessary trouble and losses.
For some applications that only utilize magnetic attraction and do not rely entirely on magnetic poles, N/S markings are not necessary.
In summary, whether magnets need to be marked with N S depends mainly on the application. Two magnets used in pairs need to be distinguished, while single magnets used for adsorption applications do not need to be marked. As an experienced magnet manufacturer, we will ask our customers about their applications and confirm whether marking is necessary.
Related marked magnets;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....