0769-23388351
Toggle Navigation
When I was reading Baidu statistics in the morning, I saw some netizens asked such a magnet question, what does the magnetism 4500 mean? Equal to how much suction? Let me introduce this issue to you below.
What does magnetism 4500 mean? Equal to how much suction?
Magnet magnetic 4500 generally refers to its magnetic strength, that is, 4500 Gauss (gs), which belongs to high-strength magnets. At present, only NdFeB materials can achieve it, and the performance grades usually need to be greater than or equal to N45. Magnets of this strength are mostly used in wall breakers, magnetized water dispensers, and magnetic therapy equipment.
How big is the 4500gs magnet?
Here are a few sample examples for your reference, N52/F25*10*10, N48/D12*30, N42/D6.4*6.6, N48/D8*5, N42/D8*8, in short, it should reach 4500gs , the magnet must have a certain thickness.
How much suction is equal to 4500 magnetism?
There is no direct conversion formula between the magnetic strength of a magnet and the attractive force of the magnet. According to the size and shape of the magnet, the attractive force is also different.
Our factory focuses on high-performance, precision permanent magnets. Customers who need high-strength magnets are welcome to consult us for quotation and delivery.
More about magnet magnetism introduction;
How to judge whether the neodymium magnet has 4000gs(gauss)
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....