0769-23388351
Toggle Navigation
When we describe how much magnetic force a magnet needs, we usually use Gauss as the unit. For example, the magnetic force of our magnet needs to reach more than 3000gs, or the magnetic force value is 800-1200gs, but Gauss is not a standard international unit, and the standard international unit is Tesla, 1 Tesla = 10000gs. We need to understand this so as to convert,
I recently encountered a netizen's magnet problem. Is rare earth neodymium magnet 2000 Gauss strong?
Many people will misunderstand that the larger the Gauss value of the magnet, the stronger the magnetic force (suction) of the magnet. In fact, this is wrong. The Gauss of the magnet is related to the material, area, thickness, etc. for example, the same specification of NdFeB strong magnet and ceramic ferrite magnet, there is no doubt that NdFeB will have stronger magnetic field, but if the specifications are different, namely Make the Gauss value of NdFeB larger, the Gauss value of ferrite magnet smaller, and the magnetic force of ferrite may be stronger. Why? Because a larger mass (volume) produces a larger magnetic field.
Back to the question, is the magnet 2000 Gauss strong? From 2000 Gauss, it can be judged as rare earth neodymium iron boron material, because ferrite can not reach such high surface magnetism basically, which is not strong for neodymium iron boron magnet, because neodymium iron boron magnet can reach more than 10000 Gauss at most, and the commonly used magnet specifications on the market are also 3000-4000 Gauss, but there are also special, how special, that is to say, when the specifications and sizes of magnets are large, It's very strong to be able to reach 2000 Gauss, so when asking such questions, it's better to specify the magnet specifications.
What's more, it should be noted that the Gauss strength of magnets is not cumulative. For example, a magnet has 3000gs, and a product has 10 such magnets, not 30000 Gauss. However, the more magnets in the product means that the closer the distance between magnets, the more uniform the magnetic field will be.
The above articles are originally shared by courage magnet Xiaofu and cannot be reproduced without permission.
Magnet 2000 Gauss related articles;
What size is 2000 gauss neodymium magnet?
Is there big difference between 2000 Gauss and 3000 Gauss magnets?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....