0769-23388351
Toggle Navigation
In the selection of NdFeB strong magnet coating, it is common to plating environment-friendly zinc and nickel. Some customers will ask when selecting the magnet coating that the nickel plating on the magnet (nickel copper nickel) can withstand the salt spray test for 48 hours, and I need to withstand the salt spray test for a longer time, such as 72 hours. Is nickel plating acceptable? Let's introduce it to you.
Can Nd-Fe-B magnet nicuni plating withstand salt spray test for 72 hours?
Nicuni plating is difficult. Some customers have high requirements for salt fog resistance and acid and alkali resistance, such as 72 hours resistance. At this time, Perrin coating can be selected, which is more guaranteed.
Ni-cu-Ni coating shaped special magnet;
Some people still have questions. Why not recommend epoxy?
Salt fog resistance 72 hours, nickel plating and epoxy are not guaranteed, so the recommendation of Parylene.
If you need salt fog resistance for 12 hours, zinc plating is recommended. At present, zinc plating can be divided into white zinc, blue zinc, blue zinc, color zinc and black zinc. At present, the market salt spray test of white zinc 16 hours: blue zinc 24 hours: color zinc 48 hours: black zinc 12 hours.
It is generally recommended that customers use nickel plating after 48 hours of salt spray. At present, the basic process of zinc plating is nickel-copper-nickel, which can ensure that the magnet is not damaged in the case of corrosion.
Above, we introduce to you whether Nd-Fe-B magnet nicuni plating can withstand 72 hours of salt fog test and the recommendation of customers for salt fog resistance hours. I hope it will be helpful to you.
More articles about neodymium magnet nickel plating;
Sintered Neodymium Magnet Chrome Coating VS Nickel Coating
Difference between magnet zinc and nickel coating in hardness, life and price
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....