0769-23388351
Toggle Navigation
The most commonly used coatings for NdFeB magnets are galvanized and nickel-plated. They have obvious differences in appearance, corrosion resistance, service life, price, etc. The following are the key points.
Polishing difference: Nickel plating is superior to galvanizing in polishing, and the appearance is brighter. Those with high requirements on product appearance generally choose nickel plating, while some magnets are not exposed, and generally galvanized with relatively low requirements on product appearance.
Differences in corrosion resistance: Zinc is an active metal and can react with acids, so its corrosion resistance is poor; after nickel plating surface treatment, its corrosion resistance is higher.
Appearance color comparison of several common magnet coatings
Difference in service life: Due to different corrosion resistance, the service life of galvanized is lower than that of nickel plating, mainly because the surface coating is easy to fall off after a long time of use, resulting in the oxidation of the magnet, thus affecting the magnetic performance.
Difference in hardness: Nickel plating is higher than galvanizing. During use, collisions can be avoided to a great extent, which makes NdFeB strong magnets fall off and break.
Price difference: Zinc plating is advantageous in this regard, and the prices are arranged from low to high as galvanized, nickel-plated, epoxy resin, etc.
Do you know which coating you want to choose after reading it? If you have any questions or need help, please communicate with us!
Many users also clicked on this article;
Neodymium magnet coating and plating [ type color thickness ]
Advantages and disadvantages of nickel coating on neodymium magnets
Will the magnet coating (plating) affect the magnetic strength of the magnet?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....