0769-23388351
Toggle Navigation
After the magnet is electroplated, it will be packaged or magnetized according to the customer's needs. Some netizens want to know how the magnet manufacturer packages the magnet and how the process is. Let's share it with you.
The steps of magnet packaging are as follows:
1. Prepare packaging materials: foam board, foam paper, carton, adhesive tape, etc.
2. Place the magnet on the foam plate, wrap the magnet with foam paper, and ensure that the magnet will not be collided and rubbed.
3. Put the wrapped magnet into the carton, and fill the gap of the carton with foam board or foam paper to prevent the magnet from moving and damaging during transportation.
4. Close the carton and seal it with adhesive tape to ensure that the carton is firm.
5. Mark the name, quantity, weight, size and other information of the magnet on the carton for the express company and the recipient to identify.
6. If necessary, put another layer of foam bag or bubble bag outside the carton to increase the protection effect.
The picture below shows the neodymium magnet package
Matters needing attention:
1. When packaging magnets, avoid contacting with other metal objects to avoid magnetic field interference.
2. When transporting magnets, avoid putting them together with sensitive items such as electronic equipment and credit cards to avoid magnetic interference.
3. If the magnet is large or heavy, it is recommended to use a professional logistics company for transportation to ensure safety.
We are a magnet manufacturer in China, can provide you with rare earth neodymium magnets, ceramic ferrite magnets, multi-pole ring magnets, motor arc magnets, cost-effective, stable supply quality, if you need to quote or customize, please send us an inquiry, thank you!
We recommend the following articles for you;
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....