0769-23388351
Toggle Navigation
When you look for ferrite magnets, you may find that the product name contains the words Y30, Y33, etc., what does that mean? Today, Chinese magnet supplier Courage Xiaofu is here to share this knowledge with you and which is better with Y30 and Y30BH.
What is a Y33 ferrite magnet?
Y33 ferrite is a kind of permanent magnet, people also call it ceramic magnet, the color is dark gray, do not need coating, with "Y" named magnet from China, Y33 is one of the many performance grades of ferrite, other Y10, Y25, y30, Y35 and so on.
Is Y33 ferrite magnet strong?
The magnetic strength of ferrite magnet is not only related to its performance level, but also to its size and thickness. If the thickness is thicker, the magnetic force will be stronger. Due to the material limitation, it will not exceed 2000 Gauss.
Y33 ferrite magnet and Y30 which is better?
The larger the number after Y, the stronger the magnetic properties, so Y33 material is better, Following figure shows the basic magnetic properties of ferrite Y30, Y30BH and Y33 grades.
Our company can provide you with Y33 and above performance grade ferrite permanent magnet, good quality, competitive price, according to your technical requirements into your required shape, magnetic force size, looking forward to working with you!
Recommended reading articles;
Demagnetization curve of ceramic ferrite Y25 Y30 Y30bh Y35
What does Y35 stand for? Grade y35 magnet related introduce summary
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....