0769-23388351
Toggle Navigation
Xiaofu found a problem, many customers customized special-shaped Ndfeb magnets without drawings and samples, directly give a size, and then ask whether this can be customized, so in this case can be customized to meet the customer's standard magnet?
This is of course not, if it is a common shape, such as a square circular ring and other conventional magnets, you only need to tell you the size, quantity, performance, coating and magnetization direction you need, the manufacturer can do according to your requirements, but the special-shaped Ndfeb high-intensity magnetic customization is different, because the special-shaped is more complicated to do, if there are no drawings and samples, Many parameters can not be said clearly by oral communication. Magnets are generally used as parts in other products. If the size or tolerance is a little different, it may not be able to be used.
This is a square countersunk magnet with an off-center hole
Many motor customers need customized special-shaped NdFeb strong magnetic, like this kind of customers need to provide drawings, because the motor is more expensive, the magnet will be very high requirements, if you can suggest to provide samples, so that the manufacturer will first test your sample, and then according to your sample customized out of the same.
If you have such a problem now, it doesn't matter, Courage magnet manufacturer can help you solve, you just need to communicate the specific parameters with the staff of Jusheng clearly, Jusheng can provide you with drawings, after your verification, according to the drawings for you to make samples.
Customers often consult special shape ultra-strong neodymium magnet products;
Large size stepped convex neodymium super strong magnet 70x20x12mm
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....