Many customers are looking for the demagnetization curve of ferrite, such as Y30 demagnetization curve, Y33 demagnetization curve, etc. The following permanent magnet supplier Courage Xiaofu has compiled a report on the demagnetization of permanent magnet ferrite (Y10 Y25 Y30 Y33 Y30BH Y35) The graph, I hope it helps you.
Ferrite Y25/Y30/Y30BH/Y35 demagnetization curve
At what degree do ferrite magnets demagnetize?
Generally, the maximum working temperature of ferrite is 250℃; but most of the losses in the range of 250℃ will recover when it drops to room temperature.
The above is the introduction of the demagnetization curve of the common performance grades of sintered ceramic ferrite magnets, compiled and edited by the neodymium magnet manufacturer Courage Xiaofu.
Guess what you are also interested in;
Ferrite grade, sintered ferrite magnetic property parameter table
What is a C8 magnet? Grade 8 ferrite magnet related introduction
What is the isotropic and the anisotropy of ferrite magnets?
You are now seeing the specifications of this magnet ring OD 13mm, bore diameter 8mm, thickness of 3.5mm, the surface of the black epoxy, due to the reason of the photo may look like a ferrite, the actual bonded ring magnets, suitable for a variety of types of motor, sensor, and electric appliances....
Neodymium iron boron is divided into sintering, bonding and injection molding according to the different production processes. The general neodymium arc magnet is sintered, also called sintered arc neodymium magnet. Today this product is a bonded arc magnet that is not much used. The difference between sintered arc magnets is that bonded NdFeB magnet tiles require molds to produce....
Courage magnet manufacturers in China specialize in the production of various specifications of NdFeB strong magnetic tiles, large-radian strong magnetic tiles, large-sized arc magnetic tiles, arc-shaped sector magnets, and you are welcome to consult the arc-shaped magnets for quotation and proofing....
You are now browsing this ring for bonded neodymium magnets, gray epoxy on the surface, outer diameter 8mm, diameter of the hole is 4.5mm, height 6mm, it's mainly used in the field of electric motors, if you need other specifications, please consult us....
The sample shows a chemical nickel coated NdFeB small cylindrical magnet with N42 grade of magnetic properties, requires magnet N pole scribe marking, 2mm diameter, 2mm thickness, axial magnetization, the difference with conventional nickel is not obvious from the appearance but it is more suitable for use in wet, acidic or alkaline environments....
This is a small and thin (flat) round countersunk magnet, diameter 8mm, thickness is only 2mm, you see the countersunk hole neodymium magnets are generally about 3mm thick, so it belongs to the thinner countersunk hole magnets, if you want to be thinner it is difficult to process, for the customization of this type of magnets we are very good at,...
N42SH grade radial hollow cylindrical magnet 6.3x3x11mm for high speed motors...
This product is a T-shaped strong magnet, the material is rare earth NdFeB, it is a custom-shaped irregular Nd magnet, the sample is N52 grade, the surface is nickel coated, mainly used for connectors, electronic products, medical equipment, the maximum working temperature It is 80 degrees Celsius. If you need to use it in a high temperature environment, you need to replace the temperature resistant material....