0769-23388351
Toggle Navigation
Ferrite magnets have their own naming rules. Now they basically use Chinese naming rules. At first there were Fer 3 or Feroba 3, but now these hierarchical names are no longer used. Later, the initial letter "C" of the ferrite (Ceramics) is used to name the hierarchy, such as C5 and C 8. The United States and Britain still use this rule. Nowadays most ceramic hard ferrite magnets are made in China, so Chinese grade naming is widely used in Europe and widely accepted in the United States. Their rule begins with Y.
Fer 3 or Feroba 3 is now called Y30H-1. Ferrite C8 is also known as Y30H-1.
Fer 2 or Feroba 2 is now called Y30. Ferrite C5 is also known as Y30.
Below is an example BH curve for Ferrite C5 (Y30). Ferrite C5 and Ferrite C8 are the most popular grades of hard ferrite (ceramic) magnets.
Most ferrite magnet grades start with C or begin with the Chinese name Y. But sometimes you will also see levels like HF26 / 18 (this is the Y30 level), which is a European naming convention, but not all European continents are in use.
The above is about the ferrite permanent magnet name related introduction, our company can provide a variety of sizes of ferrite round, ring, arc, square and multi-pole ferrite ring, need to find China magnet supplier we are undoubtedly a good choice!
It is recommended to click to view the following articles;
What is a C8 magnet? Grade 8 ferrite magnet related introduction
Is FB5H the performance grade of ferrite magnets?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....