0769-23388351
Toggle Navigation
If you are careful, you will find that the grades of NdFeB are different from the material grades of ferrite magnets. What do the respective grades mean? Is there any difference in the appearance of the grades?
First, N stands for NdFeB, the second number stands for magnetic energy product, and then the letters stand for coercivity characteristics. For example, N35 without letters stands for the normal type of N35, M stands for medium coercivity, and H stands for high coercivity.
So what does the Y in the ferrite magnet material grade mean?
It is understood that Y means permanent magnet. It shows that this ferrite is a permanent magnet ferrite. The larger the number after Y, the higher the performance. If it is PCx, such as PC40, it is soft ferrite, and it has high permeability.
Parameter table of main performance grades of sintered permanent ferrite magnets;
Guess you are interested in the following content;
How are ceramic ferrite magnets made?
What is radial ferrite magnet? Which kinds are there?
How strong is the magnetic field of ferrite magnet? How to calculate?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....