0769-23388351
Toggle Navigation
I just received an inquiry from a foreign customer and asked whether the arc magnet can be customized. Today, the permanent magnet manufacturer Courage Magnet Xiaofu came to tell you about the problems and precautions of the arc magnet customization.
Arc magnets are often used in the rotor or stator of DC motors. Due to the different motor models, revolutions, working environment, etc., the material and size of the magnets are also different, so it involves customization. Generally, magnet manufacturers can For non-standard customization, you only need to provide drawings and some detailed parameters.
Arc-shaped magnet customization needs special attention;
1, material
Different magnet material magnetic force size difference is very big, the price gap is also big.
2. Magnetization mode
There are many ways of magnetization of arc magnets. Generally, they are radially magnetized and paired. If you are not sure, please contact us.
3, temperature resistance
High temperature will cause demagnetization of the magnet, so pay attention to the selection of magnet material.
We are manufacturer of motor magnets in China, accepting customized arc neodymium magnets, arc ferrite magnets, arc samarium cobalt magnets of various performances and sizes, looking forward to your consultation.
Related arc magnet products;
Custom arc magnet related articles;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....