0769-23388351
Toggle Navigation
Magnets, a component product suitable for all walks of life, because each industry has different material, magnetic force, specifications, etc. of magnets, most customers need to customize them. Neodymium magnets are widely used in magnet materials. , Some netizens will ask, what parameters do you need to provide to your magnet manufacturer for custom neodymium strong magnets?
Customized neodymium strong magnets include shape customization, magnetic customization, and temperature customization, etc., then it is necessary to trouble the customer to provide performance grades or magnetic Gauss value, temperature resistance requirements, salt spray requirements, coating requirements, quantity, and packaging requirements. Magnet manufacturers, the more detailed the parameter data, the more powerful magnets customized by the manufacturer are more in line with the requirements, and some more complex magnets, such as special-shaped magnets, are better to provide drawings.
Pictures of neodymium magnets of various specifications and shapes
Nd-Fe-B magnet working temperature of each grade
N35 N38 N40 n42 N45 N48 N50 n52 maximum operating temperature 80 degrees
35m 38m 40m 42m 45m 48m 50m maximum operating temperature 100 degrees
33H 35H 38H 40H 42H 45H 48H Maximum operating temperature 120 degrees
30sh 33sh 35sh 38sh 40SH 42sh 45sh maximum operating temperature 150 ℃
30uh 33uh 35uh 38uh 40uh 42uh maximum operating temperature 180 degrees
30eh 33eh 35eh 38eh maximum operating temperature 200 ℃
If you have any other questions, please email us for further communication!
Relevant neodymium magnets recommended for you;
Rare earth neodymium arc sectional magnet
The following magnet knowledge recommended reading;
Neodymium magnet N35 or N33 which is better?
Detailed introduction of magnet axial magnetization and radial magnetization
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....