0769-23388351
Toggle Navigation
Today in Baidu statistics, I saw a customer searching for this word, Which one is better N35 or N33? The following editor will introduce to you the rare earth NdFeB permanent magnets N33 and N35. There is not much difference between the magnetic force and price of the two.
Which magnet is better, N35 or N33?
In terms of performance, the magnetic force is definitely better than that of N35 (under the same specifications). In terms of cost savings, the N33 is definitely better.
How much difference is one kilogram between N33 and N35 materials?
The price of N33 is cheaper, the difference is about 10-20 yuan per kilogram.
How much higher is the magnetic force of N35 magnets of the same specification than N33?
Xiaobian actually measured N35/NI/D5*8 magnetic field strength 4300gs, N33/NI/D5*8 table magnetic 3540gs. There are still some differences. As for some loosely packaged handbags, the basic n33 can meet the requirements!
The article was originally shared by Dongguan magnet manufacturer Courage Xiaofu. I look forward to your attention. Our company has long-term production and processing of NdFeB magnets, high-performance wafer magnets, high temperature resistant strong magnets, motor arc magnets, Multipole ring magnet etc. Welcome consult!
More N35 grade neodymium magnet introduction;
How much is N35 per kg? Blank sintered NdFeB N35 price trend
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....