0769-23388351
Toggle Navigation
D25mm magnets are commonly used in a wide range of applications, including door magnets, sensors, motors, electrical components, and structural fastening. If you need 25mm diameter ferrite magnets, please contact NST for samples or pricing.
In terms of specifications, D25mm round ferrite magnets are available in various thicknesses, including common options such as D25x2mm, D25x3mm, D25x4mm, D25x5mm, D25x8mm, etc. Additionally, for D25mm ferrite magnetic rings, our company commonly offers sizes such as D25xd8x6mm, D25xd15x12mm, D25xd12.5x3mm, D25xd16.5x9mm, and so on.
When selecting materials, you can choose between sintered ferrite, injection-molded ferrite, or rubber ferrite. Regardless of the material, they all offer stable magnetic properties, corrosion resistance, and resistance to demagnetization, making them ideal for cost-sensitive applications where magnetic performance requirements are not particularly stringent.
Schematic diagram of a 25x5mm thick magnetized ferrite
In terms of magnetization methods, we offer a variety of solutions tailored to customer needs, including axial magnetization, radial magnetization, and multipole magnetization (single-sided or double-sided), catering to both general magnetic applications and sensor detection requirements.
If you are looking for 25mm ferrite magnets or require a custom solution, please feel free to contact the NST team for assistance.
Related 25mm ferrite magnets;
25x3mm ceramic disc magnet on fridge stickers 1" x 1/8"
Radial multipoles sintered ferrite ring magnet 25 x 13 x 5 mm
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....