0769-23388351
Toggle Navigation
This product is a bonded NdFeB magnet. The number of magnetizing poles is 44 poles. The strong magnetic surface is marked. If you need to use this large-sized multi-pole ring neodymium magnet, please contact us.
The bonded NdFeB raw material is mixed with rare earth magnetic powder and resin, and then compressed and molded by a press. There is no magnetic field arrangement during molding, so the direction of the magnetic force is not limited, and the inner diameter, outer diameter, or The upper and lower multi-pole magnetization is one of the indispensable magnetic components for superior products such as light, thin and short. In order to delay oxidation and rust, epoxy resin is used for surface treatment, and the colors are gray, black, etc. Bonded magnets have extremely high dimensional accuracy, and can be made into magnetic components with relatively complex shapes. They have the characteristics of one-time molding, multi-polar orientation, etc., and the polarity is extremely flexible.
More size ring bonded magnets
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
Need 20-pole ring magnets? Welcome to contact NST. Our company has many stock sizes. The sintered ferrite magnetic ring uploaded today has an outer diameter of 30.8mm, a hole of 21.3mm, and a thickness of 5mm....
This product is a radially magnetized 10-pole (5N5S) ring magnet, the material is bonded NdFeB, the surface coating is black epoxy, the magnet size is 27mm outer diameter, 22.7mm inner diameter, 21mm height, if you feel this specification If you are interested, you can contact our company for a quotation, provide samples...
This product is a 12 poles axial ferrite ring designed for rowing machines. It features a relatively large central bore and is manufactured from high-performance sintered ferrite material....
If you are looking for a 6-pole (3-pole pair) multi-pole ferrite ring sample, take a look at this one. Made of sintered ferrite, it has an outer diameter of 26.5 mm, an inner bore of 12.5 mm, and a thickness of 3 mm....
This product is a radial 8-pole rotor magnet. The material is injection-molded ferrite. The surface has no special treatment. At present, our company can provide injection-molded magnetic products with various properties, including injection-molded ferrite, injection-molded NdFeB and injection-molded ferrite....