0769-23388351
Toggle Navigation
Radial magnet, that is, a magnet with radial magnetization. The strong magnetic surface of the magnet is on the side. We call this magnet radial magnet. The radial magnet can be made of a variety of materials and shapes, such as ferrite, neodymium iron boron, samarium cobalt, etc. The shape can be round, cylindrical/hollow cylindrical, annular, tile shaped, arc, etc. It is mainly used in the fields of motors, sensors, etc.
The figure below shows a cylindrical radial magnet with side suction.
What should be considered when selecting a radial magnet?
1. Main function: radial magnet is to move, fix or lift objects.
2. The required magnet shape: disc, ring, tile or special radial magnet.
3. Working temperature of magnet: this is very important, because different magnetic materials have different maximum temperature resistance and different prices, so you can consult if you are unclear.
4. Tolerance. For some precision electronic products, there are strict requirements for the diameter tolerance of magnets, such as only three positive wires or only a few negative wires.
5. Whether multipole magnetization is required, such as radial 4-pole/6-pole/8-pole/10 pole, etc
6. In general, it is recommended to consider the suction, expected price and quantity of magnets required.
The above introduces what is a radial magnet, the material and shape of the radial magnet, and some problems to be considered when selecting a radial magnet. If you need a radial magnet quotation, please contact the customer service on the website. For more samples, you can search in the search box.
Relevant radial ndfeb magnet samples;
10mm dia x 3mm thick Neodymium Radial Disc Magnets
Super tiny radial ring magnet OD1.8mm 1400 gauss
Recommended articles related to the content;
What's radially magnetized ring magnet?
Can the axially magnetized magnet be demagnetized for radial magnetization?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....