0769-23388351
Toggle Navigation
As you can see, this is a round neodymium magnet with radial magnetization and strong side magnetic force. The magnet diameter is 8mm, the thickness is 2mm, the tolerance is ±0.05mm, the surface is galvanized and the maximum operating temperature is less than 80 degrees Celsius. Similar specifications include 7x2mm, 6x2mm, 10x2/3mm. If you need our company to give you a quote, please send us an online inquiry or email.
Note: Our company is a direct selling manufacturer of neodymium magnets. We can process the magnets according to your technical requirements, including magnetic force, temperature resistance and tighter tolerance. The more you buy, the more affordable the price will be.
Related diameter circular magnet article introduction;
What is a radial magnet? What should be considered when selecting radial magnet?
Can the axially magnetized magnet be demagnetized for radial magnetization?
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
You need to buy small magnets with holes. Welcome to the Courage Magnet Factory in China. We can customize small magnets with through holes (straight holes) or countersunk holes for you. You can choose NdFeB or other weak materials. The magnetic performance is generally above 3000 Gauss. If you need to know its price, please send us an inquiry, thank you!...
This sample is a magnet with a thickness of 12mm, the material is strong NdFeB magnet, the thickness is magnetized, and the surface is galvanized. You can also choose radial magnetization, depending on your needs, the specific size is 6mm in diameter, 12mm in height and thickness....
This sample is a magnet with a diameter of 9mm and a thickness of only 1.5mm. It belongs to the series of thin and strong magnets. It is provided by the NST magnet manufacturer in China....
If you're looking for ultra-thin round magnets in stock, check out this model: 20mm in diameter and 0.5mm thick (20x0.5mm),...
This product is an industrial mounting magnet, made of the strongest neodymium magnets, square in shape, punched with countersunk screw holes to mount where it is needed, these powerful mounting magnets are typically used to lift and hold magnets, including magnetic tool holders , component lifters, clips, latch magnets, universal magnetic racks, etc....