This is a radial 24-pole magnetized ferrite ring magnet with a surface magnetic field strength of about 750gs, suitable for motor governors, sensors, and similar multi-pole ferrite rotor magnet specifications. We have many specifications, welcome to consult your requirements size of.
The multi-pole magnetic ring is to use a special magnetizer to magnetize the magnetic ring with the required number of pole pairs on the hard magnetic ring material. The magnetization effect is related to the magnetic ring material used and the performance of the magnetizer. The size of the magnetic energy product and the hysteresis attenuation are related to the above conditions.
Note: We are a manufacturer of motor magnets in China, accepting customization of multi-pole magnets (size performance).
Related multipole ferrite columns;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This sample is a speed measurement magnet, an AC geared motor multi-pole ring magnet, made of sintered ferrite, the magnetization method is radial 24 poles, the magnet size is 22.5mm in outer diameter, 12mm in inner diameter, and 6.5mm in thickness. Qi magnet manufacturers provide,...
Looking for the magnetic ring of intelligent sweeping robot and the ring magnet of the left and right wheels of sweeping machine, welcome to contact the carrich magnet manufacturer in China. Our company has many applications in the specifications of encoder, magnetic induction motor and ring magnet. Welcome to inquire and tell you the relevant information of magnet specifications and materials....
This is a radial 4-pole rotor magnet, 2n2s, made of sintered ferrite, cost-effective, corrosion-resistant, etc. It has an outer diameter of 20mm, a height of 27mm, and a bore diameter of 10.5mm, and plays an important role in drainage pumps, submersible pumps, pumping pumps, and cooling water pumps....
The product you see now is a thin flat ring magnet with more than 100 poles, 128 poles in the outer ring (64 N poles, 64 S poles), 126 poles in the inner ring, belongs to the double code channel multi-pole magnetic ring, the material is rubber magnet, so the magnetism is not strong, the surface magnetic strength is only a few hundred gauss....
This is the courage magnet manufacturer to provide you with a anisotropy multi-pole ferrite ring magnet, through the side (radial) 12 pole magnetization, the surface magnetic is about 1050 gauss, its size is 28.4mm outer diameter, 17.5mm inner hole, thickness of 4mm...
This product is a ring-shaped ferrite magnet with an outer diameter of 20mm, an inner diameter of 10mm, and a thickness of 3mm. There is no coating on the outside. The magnetizing method is axial/planar 4 poles and the surface magnetic field strength is about 980gs. If you are interested in this magnet, please contact We provide you with samples, and other specifications are needed. We can also provide you with more magnetic poles....
The magnet is a multipolar Ndfeb magnetic ring, the material is bonded neodymium magnets, there are 12 magnetic poles, using the radial inner diameter magnetization, the use of surface for the inner side, the outer diameter of the ring magnet is 28mm, the inner diameter of 24mm, the height of 10mm, the surface black electrophoresis, the measured surface magnetic field intensity of about 2680 Gauss...
This is a medium-sized ring neodymium magnet. The specific material is bonded neodymium iron boron. It is a magnet that needs to be pressed by mold. The size of the magnetic ring is 45.9mm in outer diameter, 41.4mm in inner diameter, and 13mm in height. radial inner diameter magnetization 10 poles, The surface is black epoxy coating. It is mainly used for various permanent magnet DC motors. Brushless motors。...