0769-23388351
Toggle Navigation
Why use injection moulded multipole magnetic rings on ceiling fans? What are its main uses above? Next, Xiaofu, a manufacturer of Courage magnets, will tell you about the advantages of injection moulded multipole magnetic rings for suspension fan brushless motor.
The effect of injection moulding multi-pole magnetic ring is energy saving, environmental protection, low noise, beautiful and so on. The permanent magnet material is used. By injection moulding, the multipole magnetic field is generated, and the magnetic ring can be directly loaded into the motor, which saves a lot of working procedures.
Injection moulded ferrite rings for ceiling fan motors
In addition to the use of injection ferrite magnetic rings, the ceiling fan motor magnetic rings are also bonded neodymium magnetic rings. Now plastic coated injection magnets are also popular, and 10,14,16 pcs arc ferrite magnets are combination used. Such as Industrial ceiling fan motor magnet 16 poles、Sintered ferrite arc magnets are encapsulated into rings
Dongguan Courage Magnetoelectrics Technology Co., Ltd. is china a magnet manufacturer specializing in the production of ferrite multipole magnetic rings, injection-moulded magnetic rotors and bonded Nd-Fe-B magnets. Welcome to consult samples and product quotations.
More fan/ceiling fan motor magnet samples;
2022 New fan motor rotor magnet 14 pole 110-160mm
Fan Motor 10 Pole Ring Neodymium Magnet 56x53x14mm
I guess you like the content related articles;
Role and application of plastic magnet (injection magnet) around us
Injection molded magnet global major competing country and enterprises
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....