0769-23388351
Toggle Navigation
Due to the strong magnetic force of NdFeB magnetic material, it is widely used, but the price of the material has been rising year by year in the past two years, which has caused certain cost pressure to some enterprises that use a large number of magnets and small and medium-sized NdFeB manufacturers. Some netizens Can't help but ask, will NdFeB be replaced by other magnetic materials.
What magnets can replace neodymium strong magnets?
N52 6mm x 6mm cylinder neodymium magnet 4820 gauss
It is understood that some motor manufacturers have begun to modify the design of their products. The number of Nd-Fe-B magnets used in motor equipment is decreasing. For products in middle and low-end industries, they prefer to choose ferrite (ceramic) magnets with lower prices.
For some terminal industries that have high requirements for magnet performance, such as wind power generation, high-speed motors, new energy vehicles and parts, energy-saving inverter air conditioners, energy-saving elevators, and intelligent robot manufacturing, NdFeB cannot be replaced temporarily, and There are no better alternatives in the short term.
Summary;
Magnets used in some middle and low-end fields, such as packaging, handbags, luggage buckles and toys, can indeed be replaced, while neodymium iron boron, which has strict requirements on magnet performance, cannot be replaced for the time being, and better magnetic materials cannot be found to replace them in the short term.
Sorting out related Nd-Fe-B problems;
Analysis of the causes of insufficient magnetic force of neodymium magnets
Application difference between low-end neodymium magnets and high-end neodymium magnets
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....