0769-23388351
Toggle Navigation
Which part of the long bar magnet has the smallest magnetic force? For this question raised by netizens, the following Chinese magnet supplier Courage Magnet will introduce to you the popular science.
The magnetic force in the middle position is small. The two ends of the long bar magnet are S and N grades. The magnetic field distribution is the most dispersed in the middle, because there will be mutual magnetization of the two poles, so the original magnetic force will be weakened, so the middle magnetic force is the smallest.
The magnetic field lines of the magnet start from the top of the N pole and close to the top of the S pole. Because the end has a magnetic aggregation effect, and the middle part is only a magnetic circuit inside the magnet, the end is the strongest and the middle is the weakest.
Magnetic induction line of long bar magnet
Is the middle part of the bar magnet not magnetic at all?
That's not true, but according to the principle that the magnetic field lines do not intersect, the distribution of the magnetic field lines in the middle part in space tends to diverge into the air, and there are fewer magnetic field lines close to the surface of the magnet.
Relevant bar magnets;
Long thin rare earth strong magnet 30x10x1mm
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....