0769-23388351
Toggle Navigation
With the advancement of technology, the range of speaker speakers is getting wider and wider. loudspeaker are used from mobile phone headphones, MP3 headphones to car audio and so on. Generally speaking, the magnets used in speakers/horn are sintered NdFeB or bonded NdFeb magnets. What about boron?
The amount of horn speakers is increasing, and the industry insiders will use the magnets in the speakers, called the horn magnets, or horn magnets for short. For NdFeB tweeters, generally only sintered NdFeB can be used. The main reason is that the sintered NdFeB has higher remanence and magnetic energy product than the bonded NdFeB, which can make the speaker have a good sound effect. If NdFeB is used for bonding, the db value of the speaker will basically fail to meet the design requirements.
In addition, if there are higher requirements for the working conditions or working environment of the speaker, it is necessary to further consider the performance of the magnet and the requirements of the working temperature in the selection of NdFeB magnets.
The specifications of the speaker magnet include: φ6*1, φ6*1.5, φ6*5, φ6.5*1.5, φ6.5*φ, 2*1.5, φ12*1.5, φ12.5*1.2, etc. The medium hole NdFeB magnet needs to be determined according to the required specifications of the speaker.
In addition to NdFeB materials, ferrite materials are also commonly used in speaker speakers (speakers), such as ferrite ring magnets, with various specifications.
If you have a request for a sample or a quotation of the audio speaker ring magnet, please contact us immediately.
Guess you also like;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....